Business card pocket, welded: In the format: 92 x 60 mm and located in the inner side at the bottom left 20/20 mm from the edge.
Triangular pocket, welded: In the format: 217 x 217 mm and is located on the inside left at the bottom, with scratch-resistant matt film 10/10 mm from the edge.
Brochure pocket, welded: 220 x 305 mm in size, with the opening at the top and attached either in the middle of the front page or in the middle of the inside page on the left.
Brochure pocket, welded: In the format: 117 x 305 mm, with the opening on the right and is attached either on the inside left or right.
Spine pocket, self-adhesive: With opening at the top, located on the back approx. 5 mm from the top edge. The following standard
formats are defined:
- Lever mechanism:
- fill height 30 mm > 35 x 102 mm
- fill height 55 mm > 55 x 102 mm
- Clip mechanism:
- fill height 30 mm > 35 x 102 mm
- fill height 40 mm > 35 x 102 mm
- fill height 50 mm > 55 x 102 mm
Business card pocket, self-adhesive: In the format: 95 x 60 mm and is located on the inside of the bottom left-hand side.
Triangular pocket, self-adhesive: In the format: 180 x 180 mm and is located on the inside of the bottom left-hand side.
Brochure pocket, self-adhesive: Format: 220 x 305 mm and is located either in the middle of the front page or in the middle of the inside page on the left.